You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Ives 7212

Call For Pricing

7212 Pivot Set Offset

  • Handed 3/4' offset pivot set consisting of a jamb mounted 7212 Bottom Pivot (handed), and a head frame mounted 7212 Top Pivot (non-handed).
  • Door Thickness minimum 1-3/4. (44mrn). bevel 5/8' (3mm) in 2" (51 mm).
  • Center Line Offset 3/4' (19mm) from face of door and 3/4' from edge ot door.
  • Maximum Load 200 pounds (91 kg)
  • Vertical Adjustment Range of 3/16' (5mm), which includes a positive locking feature.
  • Optional 7212 Intermediate Pivot (handed) carries up to an additional 100 pounds (45.5 kg) load Or needed for doors over 7'.

Ives 7222

7222 Pivot Set Offset

  • Handed 3/4" offset pivot set consisting of a base plate mounted 7222 Bottom Pivot (handed), and a head frame mounted 7222 Top Pivot (non-handed).
  • Door Thickness minimum 1-3/4" (44mm), bevel 1/8" (3mm) in 2. (51mm).
  • Center Line Offset 3/4" (19mrn) from face of door and 3/4. from edge of door.
  • Maximum Load 200 pounds (91 kg).
  • Vertical Adjustment Range ot 3/16' (5mm), which includes a positive bckino feature.
  • Optional 7222 Intermediate Pivot (handed) carries up to an additional 100 pounds (455 kg) load or needed tor doors over 7".

Ives 7200

7200 Series Intermediate General Information:

  • Door Height NFPA 80, section 3-8.3, requires additional intermediate pivot for some fire-rated doors. We recommend one tor every 2'6. (762mm), or fraction thereof. door height over 50' (1524mm).
  • Door Weight exceeding pivot set limit, add one intermediate pivot for each 100 lbs. (45.5 kg) additional
  • Door Thickness minimum 1-3/4. (44mm), bevel 1/8" (3mm) in 2' (51mm). 7212-7212V-7222 INT.
  • Handed 3/4' offset pivots compatible with the following pivot sets: 7212, 7212'/ and 7222.
  • Maximum Load 100 pounds (45B kg). Vertical Adjustment Range ot 3/16' (5mm). which includes a positive bcking feature.
  • Finishes: US3, usa, usto. USIOB, US26, US26D, SP4, SPIO, spa, SP313 and SPBLK.

Ives 7253

7253 Pivot Set

  • Center hung pivot set consisting of base plate mounted 7253 Bottom Pivot and a head frame mounted 7253 Top Pivot
  • Maximum Load 300 pounds (136 kg).
  • Easy Installation Tilt on bearing and bearing pin.
  • Door Thickness minimum 1-3/4' (44mm).
  • Radius Stop (A) to clear edge ot door.
  • Pivot Distance (B) 1-3/4' (44mm) minimum from iamb to centerline of pivot pin, Radius heel edge of door, 1-5/8 (41mm) minimum recommended.
  • Clearance from bottom edge ot door to the floor mounting surface is adjustable trom 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C) in the bottom rail of the door, refer to Table D. Over 3/4" (19mm) trom the door to floor mounting surface, consult factory.
  • Vertical Adjustment based on mortise preparation in bottom rail of the door.

contact form